Function Description

The power supply vehicle should have good off-road and adaptability to various road surfaces, adapt to all-weather outdoor operation, with the overall stable and reliable performance, simple operation, low noise, good emission, good maintenance and other characteristics, can well meet the needs of outdoor operation and emergency power supply.

Scope of application

With the need of national construction and development, special purpose vehicle has become an important transportation and operation equipment in economic construction, and will have a good prospect of development. In recent years, because of the increasing construction and investment needs of Chinese electric power, telecommunication, mobile, netcom, power supply car is a kind of live emergency working car designed for these industries. It can be used for communication, telecommunication, coal mine, oil field related emergency power work, especially for the emergency caused by the power outage repair, power supply plays a very important role. There is similar bidding information online in the past two years, but large projects and large quantities of procurement are in the power, China Mobile, Unicom, telecom company unit bidding.

Use common sense

Preparation Work

(1) When the car is in parking state, open the two exhaust doors on the left and right of the front of the car and fix them with hooks, then open the upper part of the car to lift the door and put down the hydraulic support.

(2) Open the double doors at the back of the carriage, first unload the load cable on the cable capstan and put one end of it on the use target, then connect it with the load equipment, and then connect the other end of the load cable with the quick plug of the power supply vehicle "load output", confirm the correct output connection phase sequence again, and do a good job of grounding, such as no ground point can be driven into the ground of the vehicle. Make temporary reliable grounding.

(3) Open the access door and control operation door on the right side and fix it with the hook. Check that the antifreeze fluid of the generator set, generator oil, fuel amount of the tank and battery voltage are normal. Then close the battery switch and check that the output load air switch is in the off state.