Cummins generator set is a widely used brand, users in the first 100 working hours according to the following conditions of operation, can extend the service life. The following for you to explain the Cummins generator set ten maintenance methods.

1) Keep the Cummins engine operating at 3/4 throttle load (75%) for as long as possible.

2) Avoid Cummins diesel generators running at idle speed for a long time or working under high horsepower for more than 5 minutes.

3) Develop the habit of paying close attention to the engine instrument during operation. If the oil temperature reaches 2F[121℃] or the coolant temperature exceeds 2F[88℃], the throttle should be turned down.

4) When the Cummins diesel generator needs more power, it can accelerate to the speed controlled by the governor.

5) Check the oil level every 10 hours during the shutdown period.

6) Cummins diesel generator set fuel must use "0" light diesel which meets the national standard performance.

7) Oil should be selected Cummins recommended oil (15W/40CF4, etc.)

8) When starting Cummins diesel generator set, it is necessary to inject oil into the oil channel system under pressure, and remove the supercharger inlet pipe and add 50-60 ml clean oil.

9) After starting, the car should be heated at idle speed or under conditions not exceeding 1000r/min until the oil pressure in the main oil passage is stable.

10) When starting, if it cannot catch fire within 30 seconds, wait one or two minutes before starting.