Basic structure

The generator is usually composed of stator, rotor, end cap and bearing. The stator consists of the stator core, the winding of the wire wrap, the frame and the other structural parts that fix these parts. The rotor is composed of rotor core (or magnetic pole, magnetic choke) winding, guard ring, center ring, slip ring, fan and rotating shaft and other components. The bearing and end cover will be the stator of the generator, the rotor is connected together, so that the rotor can rotate in the stator, do the motion of cutting the magnetic line of force, thus generating the induction potential, through the terminal lead, connected in the loop, will produce the current.

Principle of Operation

Engine is a machine that converts chemical energy into mechanical energy, and its transformation process is actually the process of working cycle. Simply put, it burns the fuel in the cylinder to generate kinetic energy and drive the reciprocating motion of the piston in the engine cylinder, thus driving the connecting rod connected to the piston and the crank connected to the connecting rod to make circular motion around the center of the crankshaft. And the power output. Let's analyze this process: a working cycle consists of four piston strokes (the so-called piston stroke refers to the distance between the piston from top dead center to bottom dead center) : intake stroke, compression stroke, expansion stroke (work stroke) and exhaust stroke.